Les normes sur la sécurité électrique au Canada – Le conseil consultatif canadien de sécurité-électricité

Electrical Safety Standards

Au Canada, la responsabilité pour la santé et la sécurité est aux mains des provinces et territoires. Chaque province et territoire a sa propre législation sur la sécurité électrique dans sa juridiction et adopte les normes et codes et délègue son autorité à un organisme administratif. Le conseil consultatif canadien de sécurité-électricité a été créé en 1989 à la suite de la signature de l’Accord de libre-échange avec les États-Unis.

Article is in English…

Electrical Safety Regulation in Canada – The Canadian Advisory Council on Electrical Safety

In Canada, the responsibility for health and safety lies with the Provinces and Territories.  Each Province and Territory has specific separate legislation governing electrical safety in its jurisdiction, which includes the adoption of codes and standards and the establishment or delegating of an authority to administer the legislation.  These authorities may be Provincial/Territorial Government Agencies, Municipalities or, in the case of delegated authorities, Crown Corporations, or other “at-arms-length agencies” .  Collectively they are referred to as Authorities Having Jurisdiction (AHJs). Each Province and Territory designates a representative, usually the chief electrical inspector or equivalent, to participate on the Canadian Electrical Code , Part I(CE Code)  Committee and on the Advisory Council on Electrical Safety (CACES).  In addition the Chief Electrical Inspectors from three of the larger municipalities participate as voting members of CACES and the CE Code Committee.  The Provinces and Territories all adopt the CE Code, with few amendments, which provides uniform electrical codes and standards throughout Canada.  The Federal Government plays a role through establishment and funding of the Standards Council of Canada (SCC), a Crown corporation which promotes standardization and accredits Standards Development and Certification organizations for Canada. This provides a framework upon which regulation of electrical safety in Canada takes place.

The Canadian Advisory Council on Electrical Safety was established in 1989, following the signing of the Canada – USA Free Trade Agreement (FTA).  Prior to this there were only three organizations developing standards and certifying products in the electrical safety area – Underwriter’s Laboratories of Canada (ULC) for fire alarm related electrical technologies, Canadian Gas Association (CGA)  for electrical features of gas products, and Canadian Standards Association (CSA) for all other electrical products.  Each of these organizations had separate interaction with regulatory authorities as required by the SCC accreditation requirements.  Also at that time, the Provincial/Territorial and Municipal  Chief Inspectors that were members of the Code committee regularly met as the Chief Electrical Inspectors Committee. With the signing of the FTA, it was anticipated that there would be many more Accredited Organizations(AO) seeking interaction with the regulatory authorities.  Rather than attend multiple meetings at various organizations around the country, the Chief Inspectors Committee offered to act as a single regulatory advisory council for all accredited standards development and certification organizations and each AO, at the time, agreed. Thus, CACES was born. 

Since its inception, CACES, has been recognized as the central regulatory authority for electrical safety in the SCC accreditation requirements. CACES provides a forum for discussing the safety, technical, and regulatory aspects of developing, promoting, and implementing electrical standards for Canada.  The Council monitors and reports on problems encountered in the field with respect to electrical safety and advise accredited organizations on those matters.

Membership of CACES consists of:
•    the thirteen Provincial and Territorial regulatory authorities, and three municipal regulators, who are  members of the CEC, Part I Committee,
•    one member each representing SCC and Health Canada, and,
•    participating Accredited Organizations which includes Standards Development Organizations (SDO), Certification Organizations (CO), and Field Evaluation Organizations (FEO) and are non-voting except for election of officers and other non-regulatory matters.
•    Associate non-voting members as requested by CACES.

The functions of CACES include the following:
•    co-ordinate with the SCC and AO’s on matters impacting the National Standards System and discussing the safety, technical, and regulatory aspects of developing, electrical standards;
•    provide advice on the adoption and enforcement practices of uniform electrical safety standards and codes across Canada and recommend to AHJ’s on the recognition of Other Recognized Documents (ORDs)  for use in their respective jurisdiction.
•    provide advice to Accredited Standards Development Organizations on the development, revision, deletion or addition to codes and standards and the application of codes or standards to electrical products including the suitability of new products,  new standards, new or special requirements (such as ORDs) and electrical product certification, listing, and examination practices.
•    Provide a forum for exchanging information on electrical safety incidents, accidents and corrective actions .
•    monitor AO activities and provide advice on testing, inspection and certification processes for electrical products.
•    Provide information on local regulations and on rules for acceptance of products and
•    feedback from regulators on problems with certified products in the field.
•    Provide AOs a forum to identify and seek input on problems associated with the application or interpretation of regulatory requirements.

Participating Accredited Organizations must comply with the following requirements:
•    provide  updates on new, revised, and deleted standards and directories of certified product listings, and a list of published ORDs and updates on additions and deletions.
•    provide information on the evaluation, testing, electrical ratings, product markings and intended use of certified products, field evaluation reports and ORDs.
•    be involved with the development and maintenance of Canadian standards in the areas for which the organizations have been accredited and work to Canadian requirements and accepted Canadian standards for products intended for the Canadian marketplace.
•    provide regulatory authorities, at no cost, assistance in regard to questions or problems regarding products certified or field evaluated by them.
•    Upon receipt of a formal regulatory authority request to investigate an incident, product
•    failure, or marking or label abuse:
•    initiate an investigation of the non-compliance.
•    submit a timely investigation status report to the regulatory authority and report whatever actions, if any, have been taken.
•    where the regulatory authority considers the action taken by the AO inadequate, consider the regulatory authorities recommendation and modify its action plan (as appropriate) or provide rationale to support its position. .
•    provide a corrective action for product failures in the marketplace in cooperation with the regulatory authorities.
•    ensure that certification or field evaluation markings relate product compliance to Canadian requirements.
•    ensure that their requirements for certification or field evaluation in all regulatory authority jurisdictions remain consistent.

Although CACES is an independent organization its recommendations have no legal standing, but, because its membership includes important influencers in electrical safety at the Federal, Provincial, Territorial and Municipal level, the committee’s decisions can have a major influence on how jurisdictions across Canada deal with similar issues concerning electrical safety and regulation.


William (Bill) Burr is the former Chair of the Canadian Advisory Council on Electrical Safety (CACES), former Director of Electrical and Elevator Safety for the Province of BC, and former Director of Electrical and Gas Standards Development and former Director of Conformity Assessment at CSA Group. Bill can be reached at Burr and Associates Consulting billburr@gmail.com.

Related Articles


Monde en mouvement

  • Nedco Québec a été honoré du prestigieux prix “Partenaire mondial de l’année dans la distribution d’automatisation industrielle de l’alliance EcoStruxure” 

    Nedco Québec a été honoré du prestigieux prix “Partenaire mondial de l’année dans la distribution d’automatisation industrielle de l’alliance EcoStruxure” 

    18-mars-2024 Extrait du LinkedIn de Nedco : Nous sommes absolument ravis d’annoncer que Nedco Québec a été honoré du prestigieux prix “Partenaire mondial de l’année dans la distribution d’automatisation industrielle de l’alliance EcoStruxure” lors de la récente “Réunion des partenaires de l’Alliance 2024” à Marrakech, organisée par Schneider Electric. 🏆 Cette réalisation remarquable souligne notre engagement indéfectible envers… Read More…

  • Jour d’Ottawa 2024

    Jour d’Ottawa 2024

    4-mars-2024 Les 26 et 27 février, la direction exécutive de l’ÉFC, accompagnée des représentant·e·s des membres, s’est rendue sur la Colline du Parlement, à Ottawa, pour défendre les intérêts des membres de l’industrie de l’électricité et de l’automatisation. Le groupe a demandé au gouvernement d’ouvrir la voie à la décarbonisation et de réduire les impacts du changement… Read More…


Formation et événements